Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Campagnolo Super Record/Record EPS V3 Power Unit
$435.00
The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit
RockShox Reverb Tackle Box for A2, B1
$341.00
RockShox Reverb Service Kits - 12 of Each size Key, 3 Top Cap Assemblies, 10 Blue 1-Piece IFPs, 10 Foam Rings, 10 Inner Seal U-Cups, 10 Inner Seal Head Bushings, 10 Inner Seal Head O-Rings, 10 Strain Relief Barbs, 10 Remote Barbs, 10 Bleed Screws, 10 Air Valve Caps, 6 Seat Bolts and Nuts, 10 Main Piston O-Rings
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Zipp CeramicSpeed Bearing Kit: 30/60 88 Front Hub, 188 Rear Hub, and 30/60/S9 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings
Campagnolo EPS Power Unit
$196.00 $490.00 60% Savings
Campagnolo's EPS Power Unit is the reliable brain of electronic shifting. Inside sits a 3-cell, 12-volt Lithium-ion battery that delivers up to 1,200 miles on a single charge. It also houses the electronics necessary to deliver pinpoint shifting precision to the front and rear derailleur mechanisms (sold separately). If you're cross-chained, the system immediately senses it and sends a message to the front derailleur to move ever so slightly to avoid chain rub. Plus, the one-piece, ultrasonically-sealed unit is impervious to water or road vibration.
Campagnolo Super Record/Record EPS V3 Interface Unit
$165.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - New shape with LED indicators on 3 sides - Battery charges through the Interface Unit, no more need to drill a charging port hole in the bicycle frame - Contains a wireless module allowing for connection to PCs, smartphones, tablets, etc., through ANT+ and Bluetooth Low Energy (BLE). Requires the use of Android 4.3 or newer, or iOS 8 or newer - Only compatible with Campagnolo Super Record and Record V3 Power Unit - Waterproof to 1m for 30 minutes (IP67 Rated) - Weathertight, o-ring sealed connectors - See PDF for complete details on the V3 app and customization
Problem Solvers Eccentric Bottom Bracket for PressFit 30 Frames
$160.00
The Problem Solvers Eccentric Bottom Bracket E46 for PressFit 30 Frames fits frames with 46mm internal-diameter bottom-bracket shells and accepts cranksets with 24mm spindles. The eccentric allows 16mm of fore/aft adjustment for ample chain tensioning. This bottom bracket comes with spacers to fit Hollowtech II, MegaExo and X-Type cranksets. And an adapter kit for GXP cranksets is sold separately (CR0097).
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer
$5.00 - $160.00
- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm
Vision Mini TT Clip-On Bar
$154.99
- Minimalist double butted aluminum extensions designed for draft legal Triathlons (ITU and UCI approved) - Composite adjustable armrests, a one piece composite aero bridge and molded armrest pads
FSA BB30 Ceramic Bearing Set
$152.99
Upgrade your BB30 bottom bracket to the long-lasting smoothness of FSA Ceramic Bearings. Lighter and harder than steel, ceramic bearings can reduce friction, increase durability, and lighten your bike. What's not to like?
Blackspire DER Guide Chain Guide
$120.00 - $150.00 $150.00 Up To 20% Savings
- Lightweight, super-efficient chain guide with no moving parts - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated Beavertail bashguard - 160g
Bontrager Speed Concept Mono Extension
$149.99
The OCLV Carbon Mono Bar Extension delivers an even more aerodynamic leading edge to Trek's drag-defying Speed Concept (Gen 2). These straight and S-Bend extensions are designed to be cut to length and have internal routing for standard or Di2 cables. - Designed specifically for 2014 Speed Concept - OCLV Carbon fiber mono extensions - Straight and S-Bend extensions are designed to be cut to length - Internally-routed for Di2 and standard cables - Designed to accept 22.2mm standard extensions
Gamut P30s Chain Guide
$149.99
- Updated chainguide design eliminates the lower roller reducing weight, noise, and complexity - S Line slider technology with o-ring ensures silent chain engagement - Updated polycarbonate bashguard features varying thickness material for increased strength - Smooth outer surface for easy cleaning and aluminum inserts at the chainring bolt holes to prevent damage during installation - ISCG and ISCG-05 mounting options - 34t-36t range - 4 bolt/104 BCD only - 180g
MRP Mega G4
$149.95
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells) - 204g (Mega Alloy ISCG)
Campagnolo Athena EPS TT Interface Unit
$142.00 $355.00 60% Savings
Campagnolo's Athena EPS TT Interface Unit is like a translator, the vital but often overlooked piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
Zipp Vuka Clip Aerobar with Vuka Alumina Extensions
$140.00
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in affordable aluminum in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance.
Gamut P20s Chain Guide
$139.99
- Updated chainguide design eliminates the lower roller reducing weight, noise and complexity - S Line slider technology with o-ring ensures silent chain engagement - Updated polycarbonate bashguard features varying thickness material for increased strength - smooth outer surface for easy cleaning and aluminum inserts at the chainring bolt holes to prevent damage during installation - BB, ISCG and ISCG-05 mounting options - 32-34t range - 4 bolt/104 BCD only
Gamut P30s Dual Ring Chain Guide
$139.99
- Updated dual-ring chainguide design eliminates the lower roller reducing weight, noise, and complexity - S Line slider technology with o-ring ensures silent chain engagement - Updated polycarbonate bashguard features varying thickness material for increased strength - Smooth outer surface for easy cleaning and aluminum inserts at the chainring bolt holes to prevent damage during installation
RockShox Reverb Remote Lever Assembly A2/B1
$137.00
RockShox Reverb Remote Assembly for A2 and B1 generation Reverb dropper seatposts. - Includes remote Lever, MMX clamp, Discrete Puck, 1500mm of new hose, new hose barb, and new hose strain relief - Works with A2 and B1 generation posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle.
Vision Team Clip-Ons
$135.99
Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.
Cane Creek VALT Spring
$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
3T S-Bend Extensions Team
$129.99
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
Gamut P20s Dual Ring Chain Guide
$129.99
- Updated dual-ring chainguide design eliminates the lower roller reducing weight, noise, and complexity - S Line slider technology with o-ring ensures silent chain engagement - Updated polycarbonate bashguard features varying thickness material for increased strength - Smooth outer surface for easy cleaning and aluminum inserts at the chainring bolt holes to prevent damage during installation
RockShox Reverb Remote Lever Assembly A1
$125.00
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$124.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano Short Battery Mount External/Internal Wiring
$119.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Blackspire Twinty 2x Chain Guide
$117.50 $146.88 20% Savings
- Lightweight, super-efficient dual-ring chain guide for 2 x 10 drivetrains - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated bashguard protects chainrings - SRAM model specific to XX, XO, X9 and X7 2x10 cranks - 145-165g
Sunlite SIS Housing Boxes
$77.49 - $112.49
- Use: S.I.S. - Length: 30mm
Shimano Di2 Battery Charger
$78.99 - $109.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Paul Component Engineering Melvin Chain Tensioner
$102.00
- Machined aluminum tensioner bolts on to derailleur hanger - Adjustable spring tension and dual floating pulley - For frames with vertical dropouts - Fits hubs with 22-28Mm chainline (From inside of dropout) - Made in USA
Page 1 of 23 Next page