Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

e*thirteen PF-30 BB for E*Thirteen Cranks
$95.95
Our BB30 and PF30 bottom brackets are thread-together systems, which eliminate the creaks common in non-thread-together bottom brackets. Our BB92 bottom bracket uses industry-exclusive, dual-row bearings to fit big performance into a small BB shell, with a center tube to seal the BB shell. Custom bearings, high-performance seals, and custom grease specifications in all bottom brackets deliver supreme durability and smooth spinning. Available for cranks with either 30mm spindle (Race and Plus cranks) or 24mm spindle (Base cranks). All BBs include our 1 year, no-questions-asked guarantee. - Bottom brackets for e*thirteen XCX TRS and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit EV-8003) - 7075-T6 black anodized cups with custom angular contact bearings - One year no questions asked bearing w
Wheels Manufacturing Threaded to 29mm ABEC-3 BB for SRAM DUB Compatible Cranks
$114.50
Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)
TruVativ Giga Pipe Team SL Bottom Bracket
$51.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.
Shimano BB-5500 Octalink V1 105 Bottom Bracket
$52.99
Compared to the power transfer of the conventional square taper spindle, the 8-splined OCTALINK interface that connects the bottom bracket and crankset increases the strength and rigidity for the entire assembly.
Shimano BB-ES51 Octalink V2 Bottom Bracket
$45.99
Shimano BB-ES51 Octalink V2 Bottom Brackets - Fits Shimano Octalink V2 Spline Cranksets - Crankarm fixing bolts not included
Shimano BB-UN26 Cartridge Bottom Bracket
$12.99
BB-UN26 cartridge bottom bracket. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly
Shimano BB-UN300
$15.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
Shimano BB-UN300
$15.99
- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested
Shimano Deore XT Bottom Bracket
$33.99
• Lightweight seal structure removes grams • Durable anodized finish • Includes left and right hand cups, spacers, inner cover, and inner o-rings • Easy installation with TL-FC25 tool • Compatible with 24mm crank spindles • English, threaded: 68/73mm bottom bracket • Pressfit: BB86/92 bottom brackets
Shimano Ultegra Bottom Bracket
$31.99
Shimano's Ultegra bottom bracket uses Pro Tour-proven technology for lighter weight and super smooth spinning, while still maintaining the same level of durability and stiffness. It's available in English, Italian, or Press Fit models.
SRAM GXP Team PressFit MTB Bottom Bracket Cups
$46.00
SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
SRAM PressFit 30 Bottom Bracket
$51.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter
RaceFace BSA CINCH 30mm Bottom Bracket BSA
$59.99
Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family. - Compatible with standard threaded BSA shells - Standard 6806 retainer bearings - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits - Inner sleeve protects against water - Rubber seal located on the bearing's external side helps to reduce the risk of water penetration
RaceFace Cinch Bottom Bracket
$59.99
- Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family - Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits
RaceFace PF30 CINCH 30mm Bottom Bracket
$59.99
Rock The BB Precise fit, smooth-rolling operation, long-living performance–what more can you ask for from a bottom bracket? Install a 30mm CINCH crankset friendly PF30 and get riding...and keep riding. Rolling deep The PF30 bottom bracket uses reliable 6806 retainer bearings packed with waterproof grease, along with wiper seals to keep the gunk out. Close Enough Won't Cut It We fired up the ol' CNC machine to make sure the anodized 30mm alloy cups of this bottom bracket provide an exact, perfectly quiet fit for your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and the appropriate spacers to ensure a perfect fit.
RaceFace PF41 Double Row CINCH 30mm Bottom Bracket
$74.99
As The Wheel Turns This trusty 30mm workhorse of a bottom bracket is built with custom RF double row cartridge bearings for trouble-free, long haul rolling for you PF41 frame. In A Sea Of Bearings These little buggers can make a huge difference, so we've made sure our double row custom retainer bearings are super durable and up for the long run. Close Enough Won't Cut It These precision steel cup are coated for corrosion resistance, and CNC-ground surfaces of this bottom bracket provide an exact, perfectly quiet fit in your frame. Weather, Or Not All RF bottom brackets come with an inner plastic sleeve to keep the elements out and include all appropriate spacers to ensure a versatile fit.
RaceFace X-Type Team XC Bottom Bracket
$44.99
Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. Features • BB Cups are forged & CNC machined from 6066 aluminum. • Tapering wall construction to minimize weight. • Custom 6805 16 ball retainer bearing • Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out. • Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.
Cane Creek Hellbender 70 BSA
$124.99
The Hellbender 70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups
Page 1 of 1