Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Thule's Gate Mate is made from heavy-duty vinyl with foam padding that protects both your bike and your truck's tailgate. Integrated Knock-Blocks prevent your bikes from sliding off the edge of the tailgate and causing damage to your vehicle and/or bike. Nylon straps keep the pad securely attached to your tailgate and anchors provide secure tie-down points for your bikes and other loads. And, you don't have to remove the pad to get to the tailgate's handle thanks to the convenient Handle Hood. The Small size is 54 inches for compact trucks, the Large is 62 inches for full-size trucks.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet
$29.95 - $39.95
Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length
Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.
Hollywood's Sport Rider SE2 2-Bike Add-on Kit lets you carry an additional 2 bikes on your next adventure. It connects easily by sliding the add-on kit into the base unit (sold separately), inserting the attachment pin & clip, then tightening the lever. - Weight: 45 lbs - Capacity: 2 bikes, max 45 lbs per bike - Fits models HR1450, HR145R, and HRT220 - Space between bikes: 10 inches - Not to be used on any trailer, fifth wheel, or towed vehicle
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
- Locking clamp gently holds the down tube of the bike for greater stability - Large wheel tray holds your bike securely during transit - Locks included to secure the bike to the carrier - Mounts directly to most factory and aftermarket rack systems (max 3.5" crossbar diameter) - Fits 1"-2.5" diameter and elliptical bike frames - Holds 1 bike - Max weight of 45 lbs/ 20 kg
Thule's Square Bar Load Stops fit on their classic square load bars (sold separately) to stabilize and support a wide variety of loads. They install quickly without tools and adjust easily thanks to the large adjustment knob. These Load Stops are compatible with any Thule square load bar.
With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), and the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). Use the Thule Fit Guide to find the right Foot Pack for your vehicle. All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's Rapid Aero Aluminum Load Bars come in 3 widths to fit most vehicles. These super-strong crossbars have a sleek, aero shape that reduces wind resistance.
Thule's Direct Mount TK Base creates a solid mounting point for Tracker II feet (sold separately) on your truck's shell or any vehicle without a factory rack. The easy-to-install base includes all necessary hardware for either fiberglass or sheet metal roof mounting. You'll get a clean, finished look from the base cover and your roof is fully protected from water leaks and scratches with the included rubber gasket.
Thule Cylinder Locks fit virtually all Thule rack feet, cargo boxes, bike trays and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.
The Thule Xadapt 10 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.
- Fits Tracker II - Pack of 4
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
If you have a Maverick suspension fork, life is good! RockyMounts' Maverick Adapter makes quick work of throwing your bike on a fork-mounted bike rack.
Having trouble getting your non-traditional bike onto your trunk or hitch rack? Struggle no more with Hollywood's Bike Adapter Pro. It quickly attaches to most bikes to form a top tube and makes it easier than ever to safely and securely attach it to your rear rack.
- Rigid 6061-aluminum body with 9mm skewer
The RockyMounts LoBall is a ridiculously easy bike rack solution for trucks, trailers, vans, SUV's, and home storage. It includes a non-locking, 9mm chromoly quick release.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Page 1 of 3 Next page