Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Tools

Wolf Tooth 8-Bit Pliers
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
Wolf Tooth EnCase System Bar Kit One
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Wolf Tooth Master Link Combo Pliers
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
Wheels Manufacturing Lockring Wrench
$29.95
- Heavy duty double-ended steel lockring wrench - 10.5" long for plenty of leverage - Fits most bottom bracket lockrings
Wera 967/9 TX HF L-Key Torx Wrench Set
$58.34
High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm
TruVativ ISIS Bottom Bracket Tool
$27.00
- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces
Topeak Nano TorqBar DX
$94.95
The Nano TorqBar DX set includes 4 / 5 / 6Nm TorqBits and is the slimmest and most compact preset torque wrench available. It is a precision-crafted, high quality tool for either the home mechanic, professional bike shop, or your own jersey pocket. Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. Also includes the 5 most popular tool bits, 3 / 4 / 5 mm hex & T20 / T25 Torx. Two of your favorite bits can be carried in the handle of the Nano TorqBar for immediate use and even greater portability during rides. - Added Features: Integrated compartment for two bits, Carry case - Body: Aluminum / Engineering grade plastic - Allen Bits: 3/4/5 mm - Functions: 15 - Torque Value: 4/5/6 Nm - Tool Material: Hardened steel - Torx Bits: T20 / T25 - Weight: 62 g / 2.19 oz (Tool w/ 1 TorqBit & 2 bits) - Size: 12 x 1.6 x 1.6 cm / 4.7” x 0.6” x 0.6”
Topeak Nano TorqBox DX
$77.95
This tool set consists of 4 / 5 / 6Nm TorqSockets that will work with any mini tool containing a 5 mm Allen wrench (or single 5 mm Allen wrench). Its advanced torque limit release design consistently applies precise torque values on component bolts for safety and prevents damage to expensive carbon parts. A carry case neatly stores three preset TorqSockets (4 / 5 / 6Nm) and the 5 most popular tool bits (3 / 4 / 5 mm hex & T20 / T25 Torx). - Added Feature: Rubber Strap, Carry case - Functions: 15 - Allen Bits: 3/4/5 mm - Tool Material: Hardened steel - Torx Bits: T20 / T25 - Torque Value: 4/5/6 Nm - Size: 8.2 x 5.1 x 2.7 cm / 3.2” x 2” x 1.1” - Weight: 130 grams
Topeak Nano Torqbox X
$52.95
The most compact adjustable torque socket available. Works with a 5mm Allen wrench or any mini-tool with a 5mm Allen key to provide correct tightening of frame and component bolts to recommended torque values for safety and performance. - Torque range: 2 – 6Nm - Functions: 7 - Tool Material: Hardened steel - TorqSocket Material: Steel / Aluminum - Rubber strap, Carry case - Size: 6.9 x 1.7cm / 2.7” x 0.7” (TorqSocket) - Weigh (TorqSocket) : 72g / 2.54oz - Weight: (TorqSocket+bits+case): 128g / 4.51oz Tools: - 3 / 4 / 5 Allen bits - T20 / T25 Torx bits
Topeak Ninja T Mountain
$59.99
Simply mount to a non-adjustable water bottle cage, the Ninja T Mountain has a stealthy built-in tool case and hidden tool that's easily accessed with a simple twist. Included precision full metal 23 function mini tool that is comfortable in the hands for trailside repairs. - Added Features: Secondary chain link fence, Chain pin breaker, Self-tightening tool - Bottle Opener: Hardened steel with spoke holder - Material (Tools): Chrome vanadium steel - Material (Tool Case): Engineering grade polymer - Size: 14.5 x 9.8 x 4.8cm / 5.7” x 3.9” x 1.9” - Weight: 234 g / 8.25 oz (w/ Tool) Tools: - 2-L / 2.5 / 3 (2 pcs) / 4 / 5 / 6 / 8 / 10mm Allen wrenches - T10 / T25 Torx - #2 Phillips / Flathead screwdrivers - 14G / 15G / Mavic M7 / Shimano spoke wrenches
Topeak Ninja Toolbox T16
$49.95
With a simple twist to engage with Ninja Master series cage, this weatherproof tool box contains a 16-function metal mini-tool for basic repair and maintenance. Tools - 2 / 2.5 / 3 / 4 (L-type) / 5 / 8mm Allen wrenches - 6mm hex tool bit - T10 / T15 / T25 Torx wrenches - #2 Phillips / flat head screw drivers - 14G / 15G spoke wrenches - CrMo steel chain tool* and chain hook Compatibility - Ninja Master cage series - Ninja Universal Bracket Weight - 92 g / 3.24oz (Ninja T16+) - 40 g / 1.41oz (ToolBox) - Leverage added on 4 / 6mm Allen wrench - L-type wrench - Tool Material: Chrome vanadium steel - Tool Body Material: Carbon fiber injection *The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains.
No Image
$1.25
- Heat treated - Individual hex keys
Stan's NoTubes Core Remover Tool
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
Stan's NoTubes DART Refill
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
Stan's NoTubes Dart Tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
Silca HX-One Home Essential Kit
$149.99
One of the first things you notice in the toolboxes of top-level motorsport or Pro-Tour mechanics is extremely high-quality hex keys. The reasoning is simple; better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. For the HX-ONE, we use the finest S2 tool steel; shock-resistant steel which has been refined by toolmakers for the optimal balance of strength, hardness, shock resistance, and dimensional control. The keys are then coated with thin-dense chrome and a high-grip, high-visibility textured polymer finish for maximum grip and control. Included with the HX-One Home Essential Kit is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The adapter turns the 6mm hex key into a 1/4" bit driver. - Fully CNC-machined beechwood box with magnetic closure - S2 steel hex keys: 2, 2.5, 3, 4, 5, 6, 8 and 10mm - Red polymer coating for superior grip on hex keys - Custom S2 stainless steel bit adaptor: 6mm to standard 1/4" bit - S2 steel Torx bits: T8, T10, T15, T20, T25, and T30 - S2 steel Screw bits: PH1, PH2, SL4, and SL5
Silca HX-Two Travel Kit
$85.00
Few tools are used as frequently and can cause as much heartache or wasted time as the seemingly simple Hex and Torx keys. It's one of the first things you notice at the top levels of motorsport tools, or in the toolboxes of Pro-Tour mechanics: extremely high-quality tools. The reasoning is simple, better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. - High-strength S2 steel tools - Precise tool interface dimensions - Polymer coating for superior grip - Laser-etched size indication - Compact tool holder - Hex Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm - Torx Wrenches: T7, T8, T9, T10, T15, T20, T25, T27, T30 - PLEASE NOTE: The T7 tool features a 100-degree bend rather than a 90-degree for improved control and access to very small fasteners
Silca Italian Army Knife—Nove
$40.00
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams
Silca Italian Army Knife—VENTI
$55.00
The Italian Army Knife VENTI builds on the flat design, forged mid-length tools, and Stainless Steel hardware of our award-winning line of Italian Army Knives. Adding new tools including the most ergonomic and functional chain breaker ever featured in a portable multi-tool, the VENTI has everything you need. The unique magnetic slide-lock design of the VENTI chain-tool allows it to be more than twice as long as other designs for exceptional ergonomics in use, while also allowing it to be removed completely from the tool for improved functionality. The forged mid-length tools are long enough to reach all common cycling fasteners, but not so long that they twist or deform under load. The ergonomic side plates also hold a discreet magnetic storage feature for a spare master link and all tools are coated with SILCA's unique high-grip chrome plating which provides better torque transfer at the bolt interface. - Metal injection sidebars with knurled grip surface and stainless steel hardware - Forged chain breaker for 10-12 speed chain - Magnetic storage for 10-12 speed compatible chain connectors - Forged and plated tools: - Hex 2/2.5/3/4/5/6/8 - Torx 8/10/20/25 - PH2/SL4 - 7mm box wrench - 8mm flare nut wrench - 10mm open-end wrench - Disc pad spreader - Valve core remover - Spoke wrenches—13G / 15G - 172 grams
Silca Ypsilon Wrench
$45.00
The YPSILON (pronounced ip.si.lon) is SILCA's take on the unassuming Y-wrench. Most tools in this layout feature 4mm, 5mm, and 6mm keys; meaning that the wrenches for some of the most common use cases in cycling are readily available in one tool. The shape of the Y-wrench also offers superior control and stability over traditional hex keys, especially in tighter workspaces. Ypsilon was designed by a team of engineers and mechanics who obsess over improving products. The body of the tool is constructed using a composite polymer with soft over-mold grips. Unlike traditional Y-wrench designs, YPSILON is customizable and adaptable to the mechanic's preferences. This is accomplished by using a 1/4" bit collet with magnetic bit attachment in place of a fixed 6mm hex. This departure from the traditional Y-wrench design was inspired by the versatility of our T-Ratchet + Ti Torque kit. The YPSILON can easily transform into any required 1/4" based tool by swapping out the bit. - High-strength CrV steel spine leading to 4mm and 5mm hex - Lightweight composite polymer body with ergonomic grips - 1/4" bit collet with magnetic bit attachment
RockShox 2011 Monarch RT3/RT/R Rear Shock Full Service Kit
$52.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
RockShox 2012 Monarch XX Rear Shock Basic Service Kit
$35.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
RockShox 50 Hour Service Kit For Super Deluxe ThruShaft C1
$46.00
50 HOUR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)
RockShox Air Can Service Kit
$17.00 - $25.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Fork Dust Wiper Upgrade Kit
$15.00
Upgrade your suspension fork with ultra-low friction wiper seals providing unmatched suspension feel, all while keeping the dirt where it belongs- because no one wants dirt in there
RockShox Fork Service Kit
$41.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Monarch with Autosag Specialized B1 Basic Service Kit
$20.00
REAR SHOCK SERVICE KIT BASIC- MONARCH WITH AUTOSAG SPECIALIZED B1
RockShox Reverb A2 200-Hour or 1-Year Service Kit
$81.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
RockShox Reverb Seatpost Bleed Tool
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
RockShox Reverb Seatpost Oil Height Tool
$7.00
RockShox, 00.6815.066.010, Reverb oil height tool
RockShox Reverb Stealth A2 200-Hour or 1-Year Service Kit
$81.00
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
RockShox Trek Reaktiv Thru Shaft 200 Hour Service Kit
$50.00
- Trek Reaktiv Thru Shaft 200 hour service kit
Pedro's 10mm Hex Driver
$21.50
- Specifically designed for quick and easy installation and removal of cranks including the Campagnolo Ultra-Torque. - Ergonomic dual-density screw driver handle. - Features extra long hex key and second ball-end. - Designed to stand up to the harsh conditions of professional use. 10mm crank bolts often require high torque and a special tool. Pedro's led the way with a tool up to these tasks. Our 10mm hex crank driver was specifically designed for quick-and-easy crank installation and removal including the Campagnolo Ultra-Torque. Features include an ergonomic dual-density screw driver handle for comfort and control, an extra long hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Also perfect for Mavic freehub body removal. Backed by Pedro's lifetime warranty.
Pedro's Splined Bottom Bracket Socket - 3/8
$18.50
Socket Tool For Shimano® and ISIS Drive® Splined 20-Tooth BB Cups - Fits all Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups and other cartridge bottom brackets. - Updated design features a square 3/8" drive. Also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. - Professional quality, precision sized for the perfect fit. Pedro's socket tools provide the professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly protecting the component and ensuring simple and safe usage for the mechanic. The updated Splined Bottom Bracket Socket features a square 3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or wrench, or in a bench vise. For tough bottom bracket jobs, make sure to check out the BB Socket Holder designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.
Pedro's Tire Levers
$4.95 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Pedro's Toothbrush
$7.49
- Durable double-ended brush - Ideal for chains, cogs, derailleurs, and chainrings. - Recommended for use with Pedro's cleaner and degreaser products. - Solvent resistant synthetic handle and bristles. - Not recommended for oral use. Pedro's Toothbrush is designed to tackle the drivetrain and is ideal for cleaning chains, cogs, derailleurs, and chainrings. The ergonomic handle is paired with two purpose built brush features. The tapering length bristles up front are designed to scrub the intricate surfaces of chains, chainrings and cassettes while at the opposite end, longer, stiffer, larger-diameter bristles reach deep between the cassette cogs removing even the deepest dirt and grime. The Pedro's Toothbrush can also be a great tool for applying degreaser to drivetrain parts. While holding the Toothbrush flat with the bristles out to the side, pour degreaser to the bristles. Then quickly move the toothbrush to the drivetrain and apply the degreaser using a light scrubbing motion. This technique works especially well with Pedro's Degreaser 13.
Pedro's Universal Crank Remover w/Handle
$26.50
Having the right tool for the job is essential when working on modern bicycles. Pedro's Universal Crank Remover provides the tools required to properly remove press fit square taper and splined cranks. Unlike similar items offered by the competition, Pedro's includes everything you need in one convenient package The Universal Crank Remover fits all cranks using 22mmx1 threads and square, tapered bottom bracket spindles and splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a “self extracting” system.
Park Tool 3-Way Internal Nipple Wrench
$16.95
Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.
Park Tool AWS-1 3-Way Hex Wrench - 4mm/5mm/6mm
$13.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
Park Tool BBT-27.2 Bottom Bracket Tool
$36.99
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16 notch 49mm OD cup - Fits FSA MegaEvo and more
Park Tool BBT-47-16 Bottom Bracket Tool — 16-Notch
$28.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together
Park Tool Bottle Opener
$8.95
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Park Tool Bottom Bracket Tool - Shimano Dura-Ace/XTR
$26.95
The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).
Park Tool CSH-1 Clamping Spoke Holder
$32.95
Your new favorite tool for truing and building wheels. The CSH-1 securely holds spokes in place during spoke tension adjustment to prevent wind-up of round and bladed spokes, as well as rotation of straight-pull spokes. The versatile head can grip spokes in multiple positions for optimal leverage and hand positioning. Constructed of forged heat-treated steel with comfortable dual-density grips. - Compatible with round and bladed spokes 2.3 mm (13 gauge) wide or less - Compatible with J-bend and straight pull spokes
Park Tool CT-3.3 Chain Tool
$41.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
Park Tool Chain Checker
$29.99
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!
Park Tool EWS-1 Electronic Shift Tool
$12.95
A handy tool designed to make installation and removal of bicycle electronic shifting wires and batteries quick and easy. - Durable composite body is durable and prevents scratching of expensive components - Angled Shimano Di2 E-TUBE ends allow for both installation and removal in tight spaces - Universal coin cell tool helps remove and install battery covers on SRAM eTap
Park Tool FR-3 Freewheel Remover
$14.95
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park Tool Freewheel Remover Wrench
$54.99
Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.
Park Tool HBH-3 Extendable Handlebar Holder
$49.95
The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage
Park Tool HCW-16.3 Chain Whip/Pedal Wrench
$32.95
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
Park Tool HCW-5 Double-Ended Lockring Spanner
$17.95
Park's Crank and Bottom Bracket Wrench is perfect for working on old-style bottom brackets. The HCW-5 is a dual-sided lockring hook spanner, featuring a three-prong side and a single hook side for different style lockrings.
Park Tool Hex Tool
$9.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park Tool LRT-4 Lockring Tool, Shimano Direct Mount
$23.95
Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction
Park Tool Mini Chain Brute Chain Tool
$20.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool Multi Tool
$13.95
Park's Multi Tool is made of investment-cast tool steel, nickel plated for durability. It includes 3, 4, 5, 6 and 8mm Allen wrenches; 8, 9, and 10mm box wrenches; and a regular screwdriver. The tools are positioned for easy use, too.
Park Tool Open Ended Metric Wrench (9, 11mm)
$7.95
Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.
Park Tool PCS 10.3 Deluxe Home Mechanic Repair Stand
$279.95
"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"
Park Tool Replacement Chain Tool Pin
$3.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Rotor Truing Fork
$19.95
If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.
Page 1 of 2 Next page